Gaggenau VG425115F 400 Series Domino Gas Stove, 38 cm wide

Domino Gas Stove, 38 cm
Width: 2 double burners,
Sold without control knobs
sold separately. You must purchase
control knobs!

Construction Type

Base Surface Material

Heritage stainless steel

Primary Product Color

Stainless Steel

Material of Pan Supports

Cast iron

Installation

Gas type

Liquidgas G30, 31 28–30/37 mbar

Alternative Gas Type

Nat Gas L/LL G25/20 mbar (DE)

Component Width

38 cm

Minimum work surface thickness

30 mm

Connection Cable Length

140.0 cm

Connector

With plug

Gas connection rating

6,000 W

Burners and Power

Maximum number of burners that can be used simultaneously

2

Cooking Zone Type

High-speed burner, standard burner

Convenience

9 precise powerlevels

Yes

Pan support Dishwasher safe

No

Control Panel Location

External

Safety

Safety features

Automatic ignition, electronic flame control, safety valve

Residual Heat Indicator

Yes

Main On/Off Switch

No

Cooking zones

High-power dual-ring burner (165 W – 4000 W), suitable for pots up to a maximum diameter of 28 cm .

Standard dual-ring burner (165 W – 2,000 W), suitable for pots up to a maximum of 24 cm in diameter .

Maintenance

Control knobs with illuminated rings, cooking zones, and power level indicators.

One-handed operation.

Full electronic control with 12 power levels for precise power adjustment, plus a cooking function.

Automatic quick ignition.

Features

Simmer function.

Cast-iron pan support with a continuous, flat cooking surface.

Brass burner rings.

Safety

Electronic flame failure device with automatic reignition.

Residual heat indicator.

Safety shut-off.

Design Notes

Depending on the type of installation (surface-mounted or flush-mounted, with or without a device cover), the specific location of the cutout and the positions of the buttons must be determined.

Follow the “Control Button Installation” diagram if the panel thickness exceeds 23 mm (a rear socket is required).

If integrating multiple Vario 400 Series devices, a VA 420 connection strip must be installed between the devices. Depending on the installation type, the appropriate connection strip must be provided.

For load-bearing capacity and stability, thinner work surfaces must be supported with appropriate substructures. Take into account the weight of the device and any additional loads.

Additional instructions for flush mounting:

Installation is possible on stone, synthetic, or solid wood work surfaces. Ensure heat resistance and that the cut edges are watertight. For other materials, please consult the work surface manufacturer.

The groove must be continuous and uniform to ensure that the appliance sits evenly on the gasket. Do not use a non-continuous groove.

The width of the joint may vary due to dimensional tolerances of the fittings and the cut of the countertop.

If multiple devices are installed in individual cutouts, a minimum spacing of 50 mm between the individual cutouts is required.

Special slots can be ordered as replacement parts.

Plan for an electrical connection (the device does not operate without a power supply).

Air intake from above.

No intermediate shelf is required.

The rear panel and walls must be heat-resistant and made of non-flammable material.

Maintain a minimum clearance of at least 150 mm from heat-sensitive furniture or adjacent surfaces, or install thermal insulation.

If the VL 414 downdraft ventilation system is used nearby, the AA 414 ventilation kit is recommended to ensure maximum performance of the range.

With a total connected load exceeding 11 kilowatts, local regulations regarding room ventilation, room size, and the integration of range hoods or exhaust fans must be observed.

The minimum distance between the cooktop surface and the cabinet above it, made of combustible material, must be 70 cm.

The minimum distance for upward ventilation is specified in the design guidelines for the individual ventilation product.

The appliance can be installed into the countertop from above.

Weight of the appliance: approx. 13 kg.

Connections

Total connected load: 6.0 kW.

Total electrical connected load: 15 W.

1.4 m power cord with plug.