Induction Cooktop, 80 cm wide, Model VI482115, 400 Series, Gaggenau

, 80 cm wide, 4 burners,
, 2 flexible zones , no
control knobs sold
separately. You must purchase
control knobs!

Cooking zones

2 Flex induction cookingzones ,23x19 cm (2200 W, with 3700 W booster ), linked together;23x38 cm (3,300 W , with 3,700 W booster ), with automatic extension up to32x30 cm (3,300 W, with 3,700 W booster ).

2 Flex induction cookingzones , 23x19 cm (2200 W, with 3700 W booster ), linked together to form23x38 cm (3, 300 W , with 3,700 W booster ), with automatic extension up to32x30 cm (3, 300 W, with 3,700 W booster ).

Controls

Control knobs with illuminated rings, cooking zone, and power level indicators.

Electronic power control with 12 output levels.

User-friendly controls with a two-color display (white/orange).

Features

Flex function for rectangular cooking zones.

Frying sensor function.

Booster function.

Stopper.

Short-term timer.

Options menu.

Power management.

Selected digital services (Home Connect)

Hob-based ventilation control (with compatible range hood).

Remote monitoring.

Remote diagnostics.

Wireless home network integration for Home Connect digital services via Wi-Fi.

Use of Home Connect features depends on Home Connect services, which are not available in every country. For more information, visit: home-connect.com.

Safety

Operation indicator.

Pot detection.

Two-stage residual heat indicator.

Safety shut-off.

Design Notes

Depending on the installation type (countertop or built-in), the specific location of the cutout and the button positions may vary.

The horizontal placement of the buttons may be aligned with specific cooking zones.

Follow the “Control Button Installation” diagram if the panel thickness exceeds 23 mm (a rear recess is required).

If combining multiple Vario 400 Series appliances, install a VA 420 connection strip between the appliances. Depending on the installation type, provide the appropriate connection strip.

Load-bearing capacity and stability: For thinner work surfaces, provide support using appropriate substructures. Take into account the weight of the appliance and any additional loads.

Additional instructions for flush mounting:

Installation is possible on stone, synthetic, or solid wood work surfaces. Ensure heat resistance and that the cut edges are watertight. For other materials, please consult the work surface manufacturer.

The groove must be continuous and uniform to ensure that the appliance sits evenly on the gasket. Do not use a non-continuous groove.

The width of the joint may vary due to dimensional tolerances of the fittings and the cut of the countertop.

If installing multiple appliances in individual cutouts, a minimum spacing of 50 mm between the individual cutouts is required.

Works only with magnetic (induction) pots and pans. For optimal heat distribution, we recommend using cookware with a sandwich-style bottom.

Special accessories (order as replacement parts):
Part No. 17006018 Frying sensor pan, ø 20 cm Part No. 17006184 Frying sensor pan, ø 24 cm Part No. 17006185 Frying sensor pan, ø 28 cm

The WP 400 001 wok pan cannot be used with this appliance.

The appliance can be installed into the countertop from above.

Device weight: approx. 19 kg.

Connections

Total connected load: 7.4 kW.

1.50 m power cord without plug.

Power consumption in standby mode/with display off: 0.5 W.

Power consumption in standby/network mode: 1.7 W.

Please refer to the user manual for instructions on how to turn off the Wi-Fi module.