90-cm-wide induction cooktop, model CX492111, Gaggenau 400 Series

, 90 cm wide,
Full surface

Cooking Zones

A single, unique cooking surface measuring 3,200 square centimeters.

Up to 6 cookware items can be placed on the cooktop simultaneously.

Controls

Easy-to-use TFT color graphic touchscreen with operating instructions.

Electronic power control with 17 output levels.

Features

Cooking sensor function.

Professional cooking function.

Dynamic cooking function.

Teppanyaki function.

Booster function for pots.

Booster function for pans.

Keep-warm function.

Single-pot detection.

Cooking timer for each cooking zone.

Stopper.

Short-term timer.

Information key with usage indicators.

Power management.

Selected digital services (Home Connect)

Hob-based ventilation control (with compatible range hood).

Remote monitoring.

Remote diagnostics.

Wireless home network integration for Home Connect digital services via Wi-Fi.

Use of Home Connect features depends on Home Connect services, which are not available in every country. For more information, please visit: home-connect.com.

Safety

Main switch.

Residual heat indicator.

Child lock.

Safety shut-off.

Delay function.

Design Notes

Depending on the installation type (surface-mounted or flush-mounted), be sure to follow the specific cross-section specifications.

If combining multiple Vario 400 Series units, a VA 420 connecting rail must be installed between the units. Depending on the installation type, the appropriate connecting rail must be provided.

Load-bearing capacity and stability: For thinner work surfaces, provide support using appropriate mounting structures. Take into account the weight of the device and any additional loads.

Additional instructions for flush mounting:

Installation is possible on stone, synthetic, or solid wood work surfaces. Ensure heat resistance and that the cut edges are watertight. For other materials, please consult the work surface manufacturer.

The groove must be continuous and uniform to ensure the appliance is positioned evenly on the gasket. Do not use a non-continuous groove.

The width of the joint may vary due to dimensional tolerances of the fittings and the cut of the countertop.

If installing multiple appliances in individual cutouts, a minimum spacing of 50 mm between the individual cutouts is required.

Works only with magnetic (induction-compatible) pots and pans. For optimal heat distribution, it is recommended to use a sandwich bottom during every cooking session.

The WP 400 001 wok pan cannot be used with this appliance.

The appliance can be inserted into the worktop from above.

Weight capacity: approx. 30 kg.

Connections

Total connected load: 7.4 kW.

1.50 m power cord without plug.

Power consumption in standby mode/with display off: 0.5 W.

Power consumption in standby/network mode: 2.0 W.

Please refer to the user manual for instructions on how to turn off the Wi-Fi module.